Tag: Pelleting Machine of Bio Organic

Where can you purchase a reasonable bio pellet machine?

The bio pellet machine is a great addition to any fertilizer production line. It will produce high-quality organic fertilizer from various types of manure. The equipment granulates the compost and turns it into pellets that could be sold or accustomed to produce bigger and much better crops. Please read on to understand more information about the granulating machine for bio pellet production and the ways to use it within your business.

This machine has a rotating axle with multiple sharp teeth which help throughout the granulation process. This machine will produce large volumes of fertilizer pellets. In order to make fertilizer quickly this machine can assist you with the production process and assist you in making additional money.

The machine suits perfectly with any fertilizer production line. The equipment helps make the entire line faster and simpler to make use of. The device is efficient, affordable and it is easy to use. This granulator makes your pellets better and improves the standard of the pellets. You should have pellets that are high-quality in order to obtain the most money using them.

The bio pellet facility works by utilizing the wet granulation method. This may cause producing pellets faster ever since the materials don’t need to be dried out. They must be fermented together with the compost making machine and they might be transformed into pellets.

The raw materials of bio organic fertilizer into pelleting machine and so the rotor actually starts to work. The various teeth around the machine shred materials and mix them so they begin to develop into granules. These granules may ultimately become pellets. Once the pellets are adequate enough they can be ejected. The device will produce lots of pellets. The appliance doesn’t use lots of energy and is particularly also eco-friendly rendering it a fantastic choice for any fertilizer production operation.

One of several big benefits associated with the equipment would be that the dimensions of the pellets is adjustable. You possibly can make pellets of just about any size by adjusting the rotating speed of your machine. The bio pellet machine yields better results than rotary drum granulators and disc granulators rendering it an inexpensive option that will help you get lots of work done. The appliance is user friendly and features security features which make applying this powerful machine safe.

Bio organic fertilizers make the ideal fertilizer mainly because they have bacteria that assists the plants. This fertilizer helps make the plants grow better and this will help preserve nutrients. The quality bio organic fertilizer granules results in healthier crops and you also obtain a higher yield with your crops which makes this machine an excellent investment for your business.

Bio organic fertilizers will help recondition the soil and they also have active soil microbes making the soil and crops healthier. The bio pellet machine is what you should produce this fertilizer which means you get a superior product. The crops is going to be happier and also the soil will be better when you select the bio pellet machine to generate all of your current bio organic fertilizer.

What are the reasons for the unstable current of bio-organic fertilizer equipment?

When the bio-organic fertilizer equipment is working, we adjust the feeding amount as long as the thickness of the material in the feeding zone is less than the maximum starting point of the compression zone, it will directly affect the effective working interval length of the compression zone and the extrusion zone, and cause electric current. Fluctuations and changes in output per hour, and if the thickness of the material layer in the feeding zone is greater than the maximum starting point of the compaction zone, in addition to increasing the thickness of the material layer in the feeding zone, it will not affect the hourly output and energy consumption per unit time. Any impact will no longer cause current and hourly output changes. Because the thickness of the material layer in the feeding zone exceeds the maximum starting point of the pressing zone, the interval between the pressing zone and the pressing zone is constant without any change. If the feed angle is greater than the critical friction angle, the material will not be grabbed into the compaction zone. As the feed volume increases, the balance of in and out will be broken. It will accumulate thicker and thicker until all the gaps are filled and blocked to the feed inlet, making the making granules machine of bio organic unable to work normally.

In the actual work of bio-organic fertilizer equipment, with the adjustment of the feed volume, the instantaneous output and the main motor current will change accordingly. And when the thickness of the feed does not exceed the maximum starting point of the compaction zone, the increase in the amount of powder we feed will not cause the phenomenon of piles of materials in the feed zone. As the problem has been mentioned before, the area that can cause instantaneous changes in output and energy consumption should be the two areas of work and material layers-the compaction zone and the squeeze zone, so we think that the third area mentioned above- -There are certain conditions for the reasonable existence of the feeding area. In other words, the fed material layer is distributed in the compaction zone, the extrusion zone and the feed zone where the total thickness does not exceed the maximum starting point of the compaction zone. The fertilizer pellet machine will work normally under the allowable power. Once the feed is fed If the amount is too large and exceeds the thickness of the maximum starting point in the compression zone, the material layer will accumulate and gradually increase, and the bio-organic fertilizer equipment will not work normally. The current is fluctuating.

Through the above analysis, let us discuss some of the phenomena shown by the bio-organic fertilizer pelleting machine under the two possible working conditions at work:

  1. When the power of the main motor is not large enough compared with the corresponding pelletizing parameters, the thickness of our feed is at the end of the extrusion zone and the maximum starting point of the compression zone (this point will vary depending on the raw material and compression Ratio, effective length-to-diameter ratio, humidity, pressure roller and other variable factors will change accordingly). Generally, it will not exceed the maximum starting point. As the feed volume increases, the pressure zone The interval length of the squeezing zone will be shortened, and the interval length of the squeezing zone will gradually increase, and the main motor current will gradually increase until it reaches the maximum allowable use. If the current reaches the protection value we set, and the thickness of the feed has not exceeded the thickness of the maximum starting point in the compression zone, if the feed volume is increased, the safety system will be activated and the excess powder will be discharged. To ensure that the bio organic fertilizer granules making machine can work normally.
  2. Assuming that the power of the main motor is very large or the feed thickness exceeds the thickness of the maximum starting point in the compression zone due to the comprehensive changes of many variable factors, the motor fails to overload. At this time, feeding more powder can not increase the output, and will not cause the increase of the main motor current. Instead, it can only increase the pile of powder accumulated in the machine until the inner cavity of the pellet machine is filled. Cause the granulator to not work normally. Of course, this special phenomenon is rarely seen in actual production (if the raw material has too much moisture, the effective aspect ratio is too small, the pressure roller is severely worn and the gap is not adjusted, the raw material is replaced, etc., this phenomenon may occur), this is our Undesirable conditions. In-depth analysis of the first commonly used working state, it is not difficult for us to know that under the premise that the relevant conditions are unchanged, as the size of the feed volume changes, the interval length of the compaction zone and the extrusion zone is within a certain range Corresponding changes are also made (the feed flow rate is reduced, the length of the compression zone is reduced, and the length of the compression zone is extended. On the contrary, the compression zone is extended and the compression zone is shortened), and the feed volume does not exceed the pressure. When the thickness of the maximum starting point in the tight zone, the length of the above two intervals is not a constant value when writing this article. The larger the length of the extrusion zone, the higher the production efficiency, and the longer the length of the particles extruded by each pressing roller.

Therefore, it is concluded that the factors of current instability under the condition of controlling the feed amount need to be investigated from the water content of the raw material, the effective aspect ratio is too small, the pressure roller is severely worn and the gap is not adjusted, and the raw material is replaced.

When you require to know more information about the bio organic pellet machine, you can visit the following link.

https://www.fertilizerfactorymachine.com/bio-pellet-machine/